Quarter Turn, Spanner and Barrel Locks

Quarter Turn Locks are commonly used where simple 1 point locking systems are required. This lock is lockable using a 5mm Double Bit key (1081.53), can operate through an angle of 90° (quarter turn), and can be installed into panels with a maximum thickness of 6mm.

This lock suits applications where a slide compression fit is required (i.e. where lock is abutting pinchweld or foam tape)

Features

• Die Cast Chrome Face
• Zinc Plated Steel Tongue 
• 5mm Double Bit Drive
• Key Sold Seperately (1081.53)
• 26mm Maximum Grip
• 6mm Maximum Panel Thickness
• 1 Way Locking

For alternative cam lock options, ovesco also stocks the Southco E5 Cam Latch range

This lock is commonly used for electrical switchboards, HVAC, medical and general cabinets, tool boxes and service vehicles. It is also used in canopies, mining and marine applications, motor homes and camper trailers.

Quarter Turn Locks are commonly used where simple 1 point locking systems are required. This lock is lockable using an 8mm square drive key (1081.52), can operate through an angle of 90° (quarter turn), and can be installed into panels with a maximum thickness of 6mm.

This lock suits applications where a slide compression fit is required (i.e. where lock is abutting pinchweld or foam tape)

Features

• Black Powder Coated Steel Face
• Zinc Plated Steel Tongue 
• 8mm Square Drive
• Key Sold Seperately (1081.52)
• 26mm Maximum Grip
• 6mm Maximum Panel Thickness
• 1 Way Locking

For alternative cam lock options, ovesco also stocks the Southco E5 Cam Latch range

This lock is commonly used for electrical switchboards, HVAC, medical and general cabinets, tool boxes and service vehicles. It is also used in canopies, mining and marine applications, motor homes and camper trailers.

Quarter Turn Locks are commonly used where simple 1 point locking systems are required. This lock is lockable using an 8mm square drive key (1081.52), can operate through an angle of 90° (quarter turn), and can be installed into panels with a maximum thickness of 20mm.

This lock suits applications where a slide compression fit is required (i.e. where lock is abutting pinchweld or foam tape)

Features

• Black Powder Coated Steel Face
• Zinc Plated Steel Tongue 
• 8mm Square Drive
• Key Sold Seperately (1081.52)
• 38mm Maximum Grip
• 20mm Maximum Panel Thickness
• 1 Way Locking

For alternative cam lock options, ovesco also stocks the Southco E5 Cam Latch range

This lock is commonly used for electrical switchboards, HVAC, medical and general cabinets, tool boxes and service vehicles. It is also used in canopies, mining and marine applications, motor homes and camper trailers.

Quarter Turn Locks are commonly used where simple 1 point locking systems are required. This lock is key lockable, can operate through an angle of 90° (quarter turn), and can be installed into panels with a maximum thickness of 6mm.

This lock suits applications where a slide compression fit is required (i.e. where lock is abutting pinchweld or foam tape)

Features

• Die Cast Chrome Plated Face
• Zinc Plated Steel Tongue 
• Key Lockable (1 Key Included)
• Wing Knob Drive
• 26mm Maximum Grip
• 6mm Maximum Panel Thickness
• 1 Way Locking

For alternative cam lock options, ovesco also stocks the Southco E5 Cam Latch range

This lock is commonly used for electrical switchboards, HVAC, medical and general cabinets, tool boxes and service vehicles. It is also used in canopies, mining and marine applications, motor homes and camper trailers.

Quarter Turn Locks are commonly used where simple 1 point locking systems are required. This lock is non-locking, can operate through an angle of 90° (quarter turn), and can be installed into panels with a maximum thickness of 6mm.

This lock is IP 65 rated, meaning the lock is completely protected against dust ingress, and is protected from water ingress for loads up to a low pressure water jet.

This lock suits applications where a slide compression fit is required (i.e. where lock is abutting pinchweld or foam tape)

Features

• Die Cast Chrome Plated Face
• Zinc Plated Steel Tongue 
• Non Locking
• Wing Knob Drive
• 26mm Maximum Grip
• 6mm Maximum Panel Thickness
• 1 Way Locking

For alternative cam lock options, ovesco also stocks the Southco E5 Cam Latch range

This lock is commonly used in areas that are already under lock and key, such as medical and general cabinets, and tool boxes. It is also used in canopies, safety equipment storage, mining and marine applications, motor homes and camper trailers.

Quarter Turn Locks are commonly used where simple 1 point locking systems are required. This lock is non-locking, can operate through an angle of 90° (quarter turn), and can be installed into panels with a maximum thickness of 6mm.

This lock suits applications where a slide compression fit is required (i.e. where lock is abutting pinchweld or foam tape)

Features

• Black Powder Coated Steel Wing Knob
• Die Cast Chrome Plated Face
• Zinc Plated Steel Tongue 
• Non Locking
• Wing Knob Drive
• 26mm Maximum Grip
• 6mm Maximum Panel Thickness
• 1 Way Locking

For alternative cam lock options, ovesco also stocks the Southco E5 Cam Latch range

This lock is commonly used in areas that are already under lock and key, such as medical and general cabinets, and tool boxes. It is also used in canopies, safety equipment storage, mining and marine applications, motor homes and camper trailers.

Quarter Turn Locks are commonly used where simple 1 point locking systems are required. This lock is key lockable, can operate through an angle of 90° (quarter turn), and can be installed into panels with a maximum thickness of 6mm.

This lock suits applications where a slide compression fit is required (i.e. where lock is abutting pinchweld or foam tape)

Features

• Black Plastic Wing Knob
• Black Powder Coated Steel Face
• Zinc Plated Steel Tongue 
• Key Lockable (2 Keys Included)
• Wing Knob Drive
• 26mm Maximum Grip
• 6mm Maximum Panel Thickness
• 1 Way Locking

For alternative cam lock options, ovesco also stocks the Southco E5 Cam Latch range

This lock is commonly used for electrical switchboards, HVAC, medical and general cabinets, tool boxes and service vehicles. It is also used in canopies, mining and marine applications, motor homes and camper trailers.

Quarter Turn Locks are commonly used where simple 1 point locking systems are required. This lock is pad lockable, can operate through an angle of 90° (quarter turn), and can be installed into panels with a maximum thickness of 6mm.

This lock is supplied without a cam. ovesco sell a wide range of cams to suit this lock.

Features

• Black Die Cast Steel Finish
• Pad Lockable
• Wing Knob Drive
• 26mm Maximum Grip
• 6mm Maximum Panel Thickness
• 1 Way Locking

For alternative cam lock options, ovesco also stocks the Southco E5 Cam Latch range

This lock is commonly used for medical, safety and general storage cabinets, tool boxes and service vehicles. It is also used in canopies, mining and marine applications, motor homes and camper trailers.

Cams are used in a wide range of locks to secure a lock into its intended location. This cam is zinc plated, has a stepped shape, and is suited to applications where a slide compression fit is required (i.e. where lock is abutting pinchweld or foam tape).

Features

• Zinc Plated Steel Finish
• 53mm Length, 19mm Width, 8mm Step
• 8mm Square Drive

This cam is suited to a wide range of swing handle locks, quarter turn locks, spanner locks and cam latches.

Cams are used in a wide range of locks to secure a lock into its intended location. This cam is zinc plated, has a straight offset shape, and is suited to applications where a slide compression fit is required (i.e. where lock is abutting pinchweld or foam tape).

Features

• Zinc Plated Steel Finish
• 54mm Length, 19mm Width, 18mm Offset
• 8mm Square Drive

This cam is suited to a wide range of swing handle locks, quarter turn locks, spanner locks and cam latches.

Cams are used in a wide range of locks to secure a lock into its intended location. This cam is zinc plated, has a stepped shape, and is suited to applications where a slide compression fit is required (i.e. where lock is abutting pinchweld or foam tape).

Features

• Zinc Plated Steel Finish
• 55mm Length, 20mm Width, 26mm Step
• 8mm Square Drive

This cam is suited to a wide range of swing handle locks, quarter turn locks, spanner locks and cam latches.

Cams are used in a wide range of locks to secure a lock into its intended location. This cam is zinc plated, has a stepped shape, and is suited to applications where a slide compression fit is required (i.e. where lock is abutting pinchweld or foam tape).

Features

• Zinc Plated Steel Finish
• 53mm Length, 19mm Width, 40mm Step
• 8mm Square Drive

This cam is suited to a wide range of swing handle locks, quarter turn locks, spanner locks and cam latches.